Catálogo General de Material para Laboratorio

Continued on next page 1018 Samplers w e b c o d e WWXKS037 Flow-Through Units, AQUABOX, Behr The flow-through AQUABOX enables the determination of on-site parameters (temp., pH, conductivity, O 2 ) under conditions of homogeneous representative sampling of ground- water and waster water. The unit permits the simultaneous determination of electrical, chemical and physical parameters under optimal and reproducible flow conditions. The AQUABOX is constructed of transparent shock-resistant PETG, a thermoplastic co- polyester. Transparency enables visual identification of problems at all times during oper- ation (e.g. sand or sediment contamination). All components which come in contact with water are constructed either of PETG (lid and flow chamber) or PP (in-flow and out-flow pipes), without use of adhesives. Therefore the water being sampled is not affected by any release of contaminants from the materials constituting the AQUABOX. The lid of the AQUABOX shields against spray/splashes and is easily opened and closed by means of quick-release fasteners. The lid has six variable-diameter splash-resistant ports for insert- ing sensors/electrodes of up to 25 mm diameter. Ports of larger diameter are available on special order. • Inside the inner container, the water spirals upward around the circularly positioned measurement sensors and exits via a splash-protective outer annular housing. • The water flow rate can be controlled by a valve. • Withdrawal of water for sample collection is performed by opening a bypass valve in- stalled in the water inflow line. • Dismantling for cleaning is performed easily and quickly by hand with the central thread- ed fastener. Advantages: • For laboratory and on-site use • For permanent installation or transportable use Article Order No. Flow-through unit AQUABOX 80 48 65056 w e b c o d e WW5PT004 WinLab ® Testing System, WINLAB ® Easy-to-handle sample taking system for manual sample taking. General purpose thanks to • easy exchange of the sample taking equipment – simple spring mechanism • four different fibre glass telescopic poles of up to 6.00 m in length • extremely strong fibre glass telescopic poles, corrosion-free • for up to 20 different sample taking devices The basic version is comprised of a telescopic pole and a sample taker. 1 Telescopic rods INGENIOUS made of fiber glass, for heavy-duty application, corrosion-free, agreeable to the touch also at lower temperatures, simple to extend and to ajust. With easy to operate spring mechanism for fast and simple replacement of sample takers. Article Order No. INGENIOUS, type standard 39 43 02005 Length adjustable from 1.50 to 2.80 m, adjustable by quarter-ro- tation with Quick Lock function INGENIOUS, type XL 39 43 02055 Length adjustable from 1.50 to 3.85 m, adjustable by folding me- chanism INGENIOUS, type XXL 10 03 02015 Length adjustable from 1.60 to 5.00 m, adjustable by folding me- chanism INGENIOUS, type super long 10 03 02025 Length adjustable from 1.70 to 6.00 m, adjustable by folding me- chanism Sampler for use with telescopic rods INGENIOUS Article Order No. 2 Sample scoop 39 43 02027 For taking scoop samples from the water surface. Graduated PE cup with spout holds 1000 ml (cup is exchangeable). The cup holder (stainless steel spring strip) is designed to let you twist the cup in order adjust the pouring direction and fix the scoop angle from 0 to 180°. 3 Sample scoop made of stainless steel 39 43 02004 Specially designed for taking mud samples. Stainless steel sampling vessel shaped like a cup with flanged edge. With lo- cking mechanism for setting the cup angle from 0 to 180°. Di- mensions of the stainless steel cup: 100 mm Ø, 130 mm height, approx. 1000 ml capacity. 2 3 4 5 6 8 Special Analysis Water, Environment