Catálogo General de Material para Laboratorio

To see other variants and accessories, please enter the webcode on our website. w e b c o d e 1017 Samplers w e b c o d e WWBPE015 Sampling Module, ORI Small, handy hose pump for taking aqueous samples (also available as a version for use in a potentially explosive environment). The module is started up either via a potential-free contact (such as a pushbutton), an RS485 interface or the multiparameter data logger Mlog which is connected to the device. When started via pushbutton, you can select either a random sample or a sample se- quence (e.g. the qualified sample). With start-up via data logger, the duration of filling is determined by the Mlog. Technical data: ATEX motor: II 2G Ex db [ib] IIB T4 Gb Standards: EN IEC 60079-0:2018 Protection class: Overall, IP 65 Electrical specification: Li-ions, 14.8 V DC / 3.4 Ah / 50.32 non-Ex Dimensions: (Ø L x H) 270 x 550 mm with 15 litres HDPE barrel Weight: 4.9 kg without battery and glass bottle 5.2 kg with Li-ion battery non-Ex Sample vessels: 15 litres HDPE barrel, 2 litres borosilicate glass Sampling, module “random sample” Pump runs while the Start button is pressed Sampling, module “qualified sampling” Pump starts qualified sampling at the push of the button (5 random samples every 2 minutes) Sampling, module “Start via multi-parameter data logger Mlog”: Pump starts up when limit value is exceeded Article Order No. Sampling module, with ATEX marking 10 22 52365 Sampling module, non ATEX 10 22 59365 Rechargeable battery 10 22 57354 Li-ion battery 14.4 V, 3400 mA in compact casing Battery charger 10 22 53541 for Li-ion battery 14.4 V – 14.8 V Each sampling module comes with 6 m suction hose incl. V2A weight element and 15 litre collecting barrel. Please order battery and charger separately! w e b c o d e WWBPE014 Stationary Sampling Device, ORI Time-proven automatic sampling device with cooling and heating function. Provides time, volume, flow and event proportional sampling of individual and pooled samples of waste water and water-based media. A special ventilation system provides for uniform cooling to 4°C. By default, sampling is done using a pressure/vacuum pump (optionally with hose pump dosing slider or water scoop). The sampling device is equipped with a direct distribution system with clogging protection. On request, explosion-protected devices for Ex zone 1 and Ex zone 2 are available. Article Order No. BASIC V solid, stationary sampling device (vacuum pump) with direct distribution system 10 22 58221 BASIC V solid, stationary sampling device (peristaltic pump) with direct distribution system 10 22 58222 Stainless steel insert and transport basket for 12 × 1.8 l PE bottles 10 22 58225 Stainless steel insert and transport basket for 12 × 2.5 l PE bottles 10 22 58226 Stainless steel insert and transport basket for 12 × 1.0 l glass bottles 10 22 58227 Sample bottles 12 × 1.8 l, PE 10 22 58231 Sample bottles 12 × 2.5 l, PE 10 22 58232 Sample bottles 12 × 1.0 l, glass 10 22 58233 Water identification for BASIC solid 10 22 58235 Stainless steel extraction for bottle insert 10 22 58236 Special Analysis Water, Environment