Catálogo General de Material para Laboratorio

To see other variants and accessories, please enter the webcode on our website. w e b c o d e 917 pH Multi-Parameter Measuring Instruments 3 4 Cell constants: 0.450 to 0.500 cm -1 0.09 to 0.110 cm -1 0.800 to 0.880 cm -1 AutoRead: automatic Tref: 20°C/25°C Temperature compensation: nLF, lin 0.000 to 3.000 %, can be switched off Power supply: universal power supply 100 to 240 V, 50/60 Hz, 4 × 1,5 V AA or 4 × 1,2 V NiMH rechargeable batteries Article Version Order No. inoLab ® Cond 7110 Single device incl. accessories 10 81 27111 inoLab ® Cond 7110 set 1 Device incl. TetraCon ® 325 and accessories 10 81 27113 4 inoLab ® Cond 7310 Conductivity measurement with documentation in compliance with GLP, on request also with integrated printer: This is the inoLab ® Cond 7310 and the inoLab ® Cond 7310P. The inoLab ® Cond 7310 can optionally be connected to a wide range of different standard and special conductivity measurement cells and has an automatic and manual temperature compensation function (can also be switched off for measurement pursuant to pharma- copeia) with linear and non-linear function for ultra-pure water and natural water pursuant to EN 27 888. Technical data: all values ±1 digit Conductivity: 0.00 to 1000 mS/cm ±0,5 % from value additional: 0.000 to 1.999 µS/cm, K= 0.01 cm -1 0.00 to 19.99 µS/cm, K= 0.1 cm -1 Spezific resistance: 0.00 to 20 MOhm cm Salinity: 0.0 to 70.0 (acc. to IOT) TDS: 0 to 1999 mg/l, 20 to 199.9 g/l Temperature: 5.0 to 105.0°C ±0.1°C Cell constants: fix 0,01 cm -1 , calibratable 0.450 to 0.500 cm -1 0.800 to 0.880 cm -1 , adjustable 0.09 to 0.110 cm -1 0.250 to 25.0 cm -1 Calibration: 1-point Tref: 20°C/25°C Temperature compensation: none, nlF, 0.000 to 10.00 %/K Calibration storage: up to 10 calibrations Data storage: manual 500/5000 automatic Logger: manual/time-controlled Article Version Order No. inoLab ® Cond 7310 Single device incl. accessories 10 81 27311 inoLab ® Cond 7310 set 2 Device incl. TetraCon ® 325 and accessories 10 81 27313 inoLab ® Cond 7310P Device with integrated printer and accessories 10 81 27317 inoLab ® Oxi 7310 Dissolved-oxygen measurement with documentation in compliance with GLP, on request also with integrated printer: This is the inoLab ® Oxi 7310 and the inoLab ® Oxi 7310P. The inoLab ® Oxi 7310 works with the time-proven electroplated dissolved-oxygen sensors by WTW, CellOx ® 325 and StirrOx ® G. A calibration history of up to 10 stored calibration logs provides information on changes in the sensor behavior. Calibration against external standard is possible comprising an automatic compensation of temperature, air pressure, and salinity. Technical data: all values ±1 digit Dissolved oxygen Concentration: 0.00 to 19.99 mg/l ±0.5 % value 0 to 90 mg/l ±0.5 % Saturation: 0.0 to 199.9 % ±0.5 % from value 0 to 600 % ±0.5 from value Partial pressure: 0 to 199.9 hPa, 0 to 1250 hPa Temperature: -5.0 to 105.0°C ±0.1°C Calibration: 1-point air calibration or against external standard Calibration storage: up to 10 calibrations Display: back-lit LCD Datenspeicher: manual 500/5000 automatic Logger: manual/time-controlled Article Version Order No. inoLab ® Oxi 7310 Single device incl. accessories 10 81 27320 inoLab ® Oxi 7310 set 1 Device incl. CellOx ® 325 and accessories 10 81 27321 inoLab ® Oxi 7310 set 4 Device incl. StirrOx ® G and accessories 10 81 27324 inoLab ® Oxi 7310P Device with integrated printer and accessories 10 81 27325 Measuring Systems Electrochemistry