Catálogo General de Material para Laboratorio

Continued on next page To see other variants and accessories, please enter the webcode on our website. w e b c o d e 693 1 Shaking Incubator type VS 60 OI Shaking table with four plastic pins to accommodate the shaking tray, the non-slip mat or the universal mount (accessories) made of aluminium. Technical data: Shaking frequency: 20 to max. 250 rpm Shaking amplitude: 30 mm Load: max. 12 kg Volume: approx. 68 l, 1 shaking tray Interior dimensions (W×D×H): 450 × 450 × 338 mm Exterior dimensions (W×D×H): 525 × 686 × 631 mm Electrical connection: 230 V 50/60 Hz, 0.8 kW Net/gross weight: 41.5/53 kg Article Order No. Shaking incubator type VS 60 OI 10 11 03052 Supplied without the illustrated accessories Shaking Incubator type VS 150 OI Chamber interior and insides of doors made of stainless steel. Basic equipment includes frame rack for trays. Interior lighting: switchable fluorescent lamp under a scattered light pane. Technical data: Shaking frequency: 20 to max. 250 rpm if only bottom tray is loaded, 20 to max. 200 rpm if both trays are loaded Shaking amplitude: 25 mm Load: max. 20 kg Volume: approx. 150 l, 2 shaking trays, for vessel height of more than 180 mm, 1 shaking tray Interior dimensions (W×D×H): 674 × 540 × 430 mm Exterior dimensions (W×D×H): 930 × 890 × 820 mm Electrical connection: 230 V, 50/60 Hz, 0.8 kW Net/gross weight: 135/270 kg Article Order No. Shaking incubator type VS 150 OI 52 11 03033 Supplied without the illustrated accessories Shaking trays for shaking incubators VS 45 OI, VS 60 OI and VS 150 OI Made of stainless steel (type A000045 und A000046), with holes to accept clamps for Erlenmeyer flasks and other accessories (see also shakers VS 15 (A000045) und VS 30 O (A000047), page 685). Article Order No. 2 Tray type A000045 52 11 23966 For shakers VS 15 and shaking incubator VS 60 OI. 450 × 450 mm Tray type A000046 52 11 23970 For shaking incubator VS 45 OI. 450 × 300 mm Tray type A000047 52 11 23980 For shakers VS 30 O and shaking incubator VS 150 OI, 670 × 537 mm. Made of 3 mm thick, anodized aluminium, with holes to accommodate Erlenmeyer flasks and other accessories. 3 Clamps for Erlenmeyer flasks Made of stainless steel, to be screwed onto shaking trays A000045, A000046 and A000047. Complete with fixing material (see also shakers page 685). Max. quantity of flask clamps per shaking tray: Type for flasks ml Tray A000045 Tray A000046 Tray A000047 Order No. A000025 25 79 52 99 52 11 23983 A000026 50 49 33 99 52 11 23984 A000027 100 36 22 50 52 11 23985 A000028 200 22 15 26 52 11 23986 A000029 250 – 300 16 13 26 52 11 23987 A000030 500 12 10 26 52 11 23988 A000031 1000 9 6 12 52 11 23989 A000053 2000 4 3 9 52 11 23990 VS 45 OI (Tablar A000046): From clamps 300 ml only 1 tray applicable VS 150 OI (Tablar A000047): From clamps 1000 ml only 1 tray applicable Other clamps on request 2 3