Catálogo General de Material para Laboratorio

To see other variants and accessories, please enter the webcode on our website. w e b c o d e 589 W ater Baths, Oil Baths Water Baths, Gestigkeit Water bath W 16 For temperatures up to 110°C. The high-grade, stainless steel bath is built securely into a special steel housing. the temperature is controlled by a thermostat with an accuracy of ±1.5 K and better. A go-dry protection system prevents overheating when there is not enough water in the bath. Additional protection is provided by temperature fuse. the low laying ring-set ena- bles the condensed water to drip back into the bath. Technical data: Internal dimensions: 160 mm dia. × 100 mm Temperature selection: 30 to 110 °C Rating: 1000 Watt Voltage: 230 V External dimensions (W × D × H): 220 × 220 × 160 mm Weight: 3 kg Article Order No. Water bath W 16 44 06 47016 Accessories Article Order No. Ring set RI 17/E 44 06 48000 Stainless steel support rod ST 12, screw-on, 12 mm Ø 44 06 48001 w e b c o d e WW18A005 1 2 Hydro Vaporization Water Baths, LAUDA For gentle steaming work with Erlenmeyer flasks, glasses, columns etc. Temperature range from approx. 5°C above ambient to boiling point. Temperature control by tension thermostat, protection of the heating element by overtemperature cut-out. The adjustable water level regulator is a standard feature. The units have the CE mark. Vaporization bath type H 5 V Bath, frame and perforated floor above the heating element made of stainless steel. Sets of rings made of plastic is a standard feature. The square cover frame (W 265 mm x L 265 mm) is removable. Its 9-part set of rings, made of heat-resistant plastic material can be parted. Its diameter can be varied in approx. 20 mm steps (min. 32.5 / max. 173.5 mm). Housing made of electrolytically galvanised sheet steel, powder coated. Adjustable water level regulatoris mounted on the back. For 230 V, 50/60 Hz, 1.0 kW power supply (also available in 115 V; 60 Hz and 100 V; 50/60 Hz). Type Outer W×H×D mm Useful W×H×D mm Vol. approx. l Wght approx. kg Connec. kW Order No. 1 H 5 V 342×180×400 240×120×240 5 9 1.0 10 11 03066 Accessories Article Order No. Support rod made of stainless steel 10 11 03039 316 mm long, 12 mm dia. Water baths for fume hoods type H 11 V und H 19 V Type Outer W × H × D mm Qty ope- nings Opening Ø mm Useful height mm Wght approx. kg Con- nec. kW Order No. H 11 V 430×155×300 6 91 100 6.1 1.5 10 11 03069 2 H 19 V 690×155×300 8 111 100 8.2 1.5 10 11 03070 Vaporization baths especially for use with fume hoods (digestories). Bath, removable re- cessed lid with holes and perforated floor above the heating element made of stainless steel. The openings in the lid are covered by sets of rings made of heat-resistant plastic material. The standard adjustable water level regulator is mounted on the right-hand side of the bath. For 230 V, 50/60 Hz, 1.5 kW power supply (also available in 115 V; 60 Hz and 100 V; 50/60 Hz). Vaporization water baths H 6 V and H 9 V Bath frame with openings and parted perforated floor plate above the heating element made of stainless steel. Housing made of electrolytically galvanized sheet steel, power coated. The openings in the frame are covered by heatresistant plastic ring sets. A support rod of 600 mm length, 12 mm diameter, made of stainless steel, is behind each opening. Water level regulator is mounted on the left-hand side. For 230 V, 50/60 Hz power supply (also available in 115 V; 60 Hz and 100 V; 50/60 Hz). Type Outer W × H × D mm Qty ope- nings Opening Ø mm Useful height mm Wght approx. kg Con- nec. kW Order No. H 6 V 682×190×232 4 131 90 12 1.0 10 11 03067 3 H 9 V 982×190×232 6 131 90 16 1.5 10 11 03068 3 Heating Units, Refrigerating Units Temperature Controllers