Catálogo General de Material para Laboratorio

To see other variants and accessories, please enter the webcode on our website. w e b c o d e 565 Heating Plates, Multipurpose Baths Please note: The range 30 to 110°C is not suitable for cooking purposes. 1 2 3 Hot Plates made of CERAN 500 ® , Gestigkeit High-duty hot plates made of CERAN ® with thermostatic temperature control from +50 to 500°C CERAN ® - an extraordinary glass ceramic which is extremely resistant to breakage and changes of temperature, will not distort, infrared transmitting and also hight acid-resistant. Its popularity as a material for hot plates in increasing continually. Features: The low-mass plate is electrically heated over its full surface, and is embedded into a high-grade, stainless steel frame which is mounted on an internally insulated stainless steel housing. The housing is 5 mm bigger all-round than the Ceran plate. Four feet, which can be individually adjusted to an approximate height of 8 mm, ensure wobble-free stand- ing. The overall height when the feet are screwed right in amounts to 98 mm. Types 4 A and 4 SR are equipped with additional sockets for 4 screw-in retort rods with a diameter of 12 mm. The entire temperature control system is accommodated in a sealed pressure-cast alu- minium case with IP 65 protection. The temperature is set on a °C temperature scale from +50 to 500°C and remains constant automatically. Very good control accuracy, e.g. ± 4°C at 100°C to ±2°C at up to 300°C an more, are achieved thanks to the low-mass heating system and fast responding temperature sensor. These small differences are hardly nota- ble in the heated material. Heat up times are very short, e.g. just 8 minutes to 500°C. Series A - Bench-top units with attached control case Type Platform size mm Wght kg P rating W Voltage V Order No. 1 4 A 430×140 5 1500 230 43 06 05004 11 A 280×280 5.5 2000 230 43 06 05011 2 22 A 280×430 7 3000 230 43 06 05022 33 A 430×430 9 4400 3×400 43 06 05033 44 A 430×580 11.5 5700 3×400 43 06 05044 Series SR - Units with a separate control case for wall mounting Type Platform size mm Wght kg P rating W Voltage V Order No. 4 SR 430×140 5 1500 230 43 06 05204 11 SR 280×280 5.5 2000 230 43 06 05211 3 22 SR 280×430 7 3000 230 43 06 05222 33 SR 430×430 9 4400 3×400 43 06 05233 44 SR 430×580 11.5 5700 3×400 43 06 05244 The standard length of the cable between the control case and the heater is 1.3 m. Each additional 0.5 m incurs an extra charge equal to 1% of the unit’s price. Please quote re- quired cable length when ordering. 4 Series EB-C - Flush-mounting units for installing in benches Type Platform size mm Heating area mm Height approx. mm P rating W Voltage V Order No. 11 EB-C 350×350 260×260 120 2000 230 10 06 05311 22 EB-C 500×350 410×260 120 3000 230 10 06 05322 33 EB-C 500×500 410×410 120 4400 3×400 10 06 05333 44 EB-C 650×500 560×410 120 5700 3×400 10 06 05344 Hot plate as flush-mounting unit for installing in benches. Separate controller case for in- stalling behind the bench frame. The standard length of the cable between the hot plate and the controller case is 0.65 m. For more technical specifications go to www.gestigkeit.de. 4 Type A mm B mm C mm D mm P rating W Voltage V Temp. °C Wght kg Order No. TH12 290 440 308 458 2400 230 50 – 300 14 43 06 01212 TH13 290 440 308 458 2400 230 100 – 370 14 43 06 01213 HT21 350 500 364 514 1800 230 30 – 110 19 43 06 01121 HT22 350 500 364 514 2850 230 50 – 300 19 43 06 01122 HT23 350 500 364 514 2850 230 100 – 370 19 43 06 01123 HT31 430 580 442 592 2000 230 30 – 110 26 43 06 01131 HT32-230 430 580 442 592 4000 230 50 – 300 26 43 06 01132 HT32-400 430 580 442 592 4000 3×400 50 – 300 26 43 06 01232 HT33-230 430 580 442 592 4000 230 100 – 370 26 43 06 01133 HT33-400 430 580 442 592 4000 3×400 100 – 370 26 43 06 01233 Heating Units, Refrigerating Units Temperature Controllers