Catálogo General de Material para Laboratorio

To see other variants and accessories, please enter the webcode on our website. w e b c o d e 531 Heating Cabinets, Drying Cabinets, Sterilizers, Microwaves w e b c o d e WW91A011 1 2 Single- and TwinDISPLAY, Memmert Premium convenience and intelligent function A comparison of the model variants SingleDISPLAY and TwinDISPLAY 1 ControlCOCKPIT with one TFT display 2 ControlCOCKPIT with two TFT displays Available parameters on the ControlCOCK- PIT: temperature (either Celsius or Fahren- heit), fan speed, exhaust air flap position, program runtime, time zones, daylight-sav- ing time Available parameters on the ControlCOCK- PIT: temperature (either Celsius or Fahren- heit), relative humidity, light, CO 2 , pressure, O 2 , fan speed, exhaust air flap position, program runtime, time zones, daylight-sav- ing time One temperature sensor Pt100 DIN class A in a 4-wire circuit Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error HeatBALANCE function for application specific adjustment of heating power dis- tribution (balance) between the upper and lower heating groups in an adjustment range between -50% and +50% (do not apply to size 30, HPP110, IPP110plus, ICP, ICH) Software AtmoCONTROL 1) for data read out and programming of the data logger via Ethernet interface (temporary trial ver- sion as free download). USB stick with At- moCONTROL software available as an ac- cessory on request. Software AtmoCONTROL 1) on USB pen drive for programming, managing and transferring of programs via Ethernet inter- face or USB port ControlCOCKPIT with USB port for up- loading programs, reading out protocol logs, activating the User-ID function Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 val- ues correspond to approx. 1 week) Ethernet interface on the rear of the appli- ance for reading out the protocol log Ethernet interface on the rear of the appli- ance for reading out the protocol log and for uploading and implementing programs and for online logging Double overtemperature protection: Elec- tronic temperature monitoring with freely adjustable monitoring temperature (for U/I/S devices with option A6 TWW/TWB, protection class 3.1 or 2), mechanical tem- perature limiter TB acc. to DIN 12880:2007-05 Multiple overtemperature protection: Elec- tronic temperature monitoring TWW/TWB (protection class 3.1 or 2 resp. 3.3 for units with active cooling) and mechanical tem- perature limiter TB (protection class 1) acc. to. DIN 12880:2007-05, AutoSAFETY auto- matically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/un- dertemperature and also for all other pa- rameters such as relative humidity, CO 2 . Housing made of structured stainless steel, rear wall galvanised sheet steel, operation and parameter setting via ControlCOCKPIT Hot-condition coupler on the rear for single-phase power cable connection according to the country-specific systems and IEC standards Integrated data logger with a memory capacity for minimum 10 years Language setting via ControlCOCKPIT - available languages: German, English, Spanish, French, Polish, Italian, Hungarian, Czech Digital countdown timer with target time input, can be set from 1 minute to 99 days SetpointWAIT function starts the process time only after the setpoint temperature has been reached at all measuring points – optionally also for the recorded temperature values of the Pt100 sensors which can be placed at any position in the interior Setting of three calibration values each for temperature and additional device-specific parameters directly at the ControlCOCKPIT (e.g. relative humidity) 1) Memmert GmbH & Co. KG as a manufacturer clearly identifies its devices which are medical devices in the sense of European law. The AtmoCONTROL software is not a medical device. For all MEMMERT medical products/devices, use as intended is possible without the AtmoCONTROL software. AtmoCONTROL when used in combination with Memmert GmbH & Co.KG is intended for read-out and logging only. Heating Units, Refrigerating Units Temperature Controllers