Catálogo General de Material para Laboratorio

Continued on next page 490 Samplers w e b c o d e WWR4Q028 1 2 3 UniSampler, BÜRKLE UniSampler with telescopic lance For sampling of liquids from precisely determined depths. Telescopic suction tube can be varied to a maximum length of 100 cm. Operation 1. Set the desired sampling depth by adjusting the suction lance 2. Attach the sampling bottle to the adapter 3. Lower the suction lance into the medium 4. Create a vacuum with the hand pump and collect the sample 5. Remove the filled sampling bottle, close and label it • PP suction tube, PVC suction hose • Incl. 5 sample bottles PP at 250 ml and 500 ml each, hand vacuum pump and adapter for sample bottles 100 to 1000 ml, 20 seal-it bottle seals in transport case. Article Order No. 1 UniSampler with telescopic lance 39 04 45611 UniSampler with hose Stainless steel hose weight. Sampler for deep, narrow and hard-to-reach spots. The heavy-duty metal tube brings the hose to any desired depth. Once again the samples are collected using a hand-operated pump and transferred directly into sampling bottles to ensure sampling purity. Operation 1. Lower suction hose to desired depth 2. Attach sampling bottle to adapter 3. Create a vacuum with the hand pump and collect the sample 4. Remove the filled sampling bottle and label it • PVC suction hose, 2.50 m long • Incl. sample bottles PP 1000 ml, hand vacuum pump and adapter for sample bottles 100 to 1000 ml, hose weight V2A, 20 seal-it label seals in case Article Order No. 2 UniSampler with tube 39 04 45612 Sample bottle 1000 ml 39 04 45631 Spare tube PVC, 2.50 m long 39 04 45621 UniSampler “Ex” Specially for combustible liquids of hazard class A I (e.g. gasoline). There is an electrical- ly conductive connection between the glass bottle and both parts are grounded with an earth cable. Operation 1. Connect to ground 2. Lower the suction hose to the required depth 3. Plug the adapter on the sample bottle 4. Create a vacuum with the hand pump and collect the sample 5. Remove, close and label the filled sample bottle • PTB approval D-333-009 618/00 • Incl. 4 m hose (NBR), glass bottle 1000 ml, bottle adapter, bottle stand, vacuum pump, grounding cable and hose weight (brass) in case Article Order No. 3 UniSampler “Ex” 39 04 45613 Sample bottle, glass, 1000 ml 39 04 45610 w e b c o d e WWR4Q046 4 Disposable DispoSampler, BÜRKLE-LaboPlast ® DispoSampler – for the highest standards in sampling The Bürkle disposable samplers – DispoSampler – are used to take samples of liquids, viscous media, powders and granulates. Target point samples can be taken, all-layer and cross-section samples, as well as small and large sample quantities. Unlike conventional reusable samplers, disposable samp- lers do not need to be cleaned after use. • Cleaning reusable samplers is a demanding and often complicated task, with greasy, strongly adhesive or toxic substances. Sometimes the task is even impossible • Work processes do not have to be interrupted by cleaning • Cross contamination is completely eliminated • The cleaning method does not need to be validated in audits • Time and money are saved Sample Preparation Sampling